|
The EPM01 active energy meter was designed for monitoring and measuring electrical loads;It is presented in the form of an effective solution in determining costs. |
|
|
|
The measuring range of the Energy Meter extends from 5W to 3680W (maximum current of 16A);If the values fall below or exceed these limit values |
|
accurate measurements can no longer be performed;Also |
|
the device can be overloaded and |
|
as a result |
|
destroyed. |
|
|
|
Characteristics: |
|
|
|
Current time (24 hours) |
|
week |
|
electrical load and consumption cost |
|
Total time |
|
total energy used as well as increased energy costs. |
|
Total recording time |
|
total time and percentage |
|
Dual energy consumption program |
|
Before use: |
|
The active energy meter is only suitable for operation with 230V AC sources;It can only be connected to 230V AC 50/60Hz power sources. |
|
Operation of the Energy Meter is allowed only in closed spaces and in dry environments;Do not use the Energy Meter in open spaces. |
|
Always read the identification labels of the connected devices to check if their specifications correspond to those of the Energy Meter. |
|
|
|
Connection: |
|
|
|
After connecting the Energy Meter to an outlet or a power source |
|
the capacitors within the device will charge;After 15 minutes |
|
the capacitors will have enough energy to turn on the LCD display;At this moment |
|
the current time and energy consumption can be adjusted. |
|
|
|
Note: the internal Li-ion battery used to support the LCD display needs at least 12 hours to fully charge. |
|
|
|
Technical data |
|
|
|
Operating voltage 230V AC/50/60Hz |
|
alternative voltage; (NEEDLE) |
|
Maximum connected current 3680w |
|
Maximum current 16A |
|
Rechargeable battery 2.6V |
|
40mAH |
|
12 H |
|
4mA |
|
Power absorbed/power consumed via a connection plug/protected socket |
|
Working temperature +10A°C to +40A°C |
|
Energy display 0kwh -999.9 kwh |
|
Maximum recording time 9999 hours |
|
Working temperature +5°C to +40°C |
|
Working humidity 80% below 31°C |
|
from 31°C to 40°C this figure decreases linearly to 50% |
|
Degree of protection IP20 |
|
Pollution degree 2 |
|
Notes: Do not use two Energy Meters at the same time |
Excelent
