TORCH-P4538
Work flashlight |
- Light source: LED 10+1 |
- Maximum light output: 700 lm |
- Duration of operation: 3-6 hours |
- Maximum beam distance: 45 m |
- Power supply: Li-Ion 1200mAh |
- Built-in magnets |
- Material: ABS plastic + rubber |
After pressing the ON/OFF button during lighting |
the BOOST function is activated |
which increases the lighting power of the lamp for 30 seconds. |
Then the lighting power decreases to the initial value;If you want to turn off the lamp |
hold the ON/OFF button for 3 seconds. |
Charging the battery |
Charge the battery before first use;The battery discharges spontaneously |
which is why it must be recharged at least 3 times a month |
to prevent voltage drop and possible damage. |
The charging status of the battery is indicated by 4 color LED diodes;As soon as the battery of the work torch is almost discharged |
only one LED lights up;During charging |
the second LED and the third LED light up gradually;When all 4 LEDs light up |
the battery of the work torch is fully charged and can be disconnected from the power source. |
Warning |
- The new lamp must be charged before use |
- The lamp battery must be kept charged |
to prevent the voltage from falling below the limit level;For this reason |
we recommend charging at least once every 3 months |
even if not once use;The charging temperature of the flashlight is from +5 °C to +45 °C. |
- In case the lamp does not illuminate or illuminates weakly |
it must be charged immediately. |
- In case of damage or destruction of the battery during the warranty period of the lamp (battery) due to non-compliance with the mentioned rules |
the complaint will not be accepted. |
- Charge the lamp in dry indoor spaces. |
- Do not throw the lamp or the battery into fire |
do not disassemble or short-circuit them. |
- This device cannot be used by children and people whose physical |
sensory or mental capacity |
or insufficient experience and knowledge prevent its safe use |
if they are not supervised by the person responsible for their safety. |
- Keep the lamp out of the reach of children;Do not throw electrical consumers in unsorted municipal waste |
use the reception bases for sorted waste;For current information on the reception bases |
contact the local authorities;If electrical consumers are stored at municipal waste stocks |
dangerous substances can infiltrate into the groundwater and reach the food chain |
endangering your health. |
Packaging: blister 1 pc. |