|
Soldering gun for tin |
|
fludor |
|
power 75W |
|
- it is powered at 230V AC |
|
- the set also contains 5 spare tips |
|
Packaging: blister 1 pc |
|
|
|
Destination: |
|
|
|
The transformer soldering gun is designed for soldering small components;It is especially recommended for soldering connections in electrotechnics |
|
where the soldered components will not be damaged by the resistance heat of the soldering loop;It is a compact device |
|
in accordance with the regulations valid during its manufacture and approved for operation by the national verification center;The transformer with nickel terminals of the secondary is deposited in the plastic case;The soldering loop is fixed on their ends with the help of M3 screws;Operation is controlled using the microswitch button;In the case |
|
under the terminals of the secondary |
|
is the LED diode;The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m;The use: Before putting into operation |
|
the handle must be adjusted in the right working position;During this action |
|
the soldering gun must be disconnected from the electrical network;After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection) |
|
the device is ready for use;By pressing the button of the soldering gun |
|
it is put into operation;At the same time |
|
the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area;The sticking time - button contact is 10 seconds |
|
the rest period until the next start is 30 seconds;This cycle must be respected in order not to overload the transformer;Before the first gluing |
|
it is recommended to dip the hot handle in rosin;When using the tubular tin (max;Ø ±3 mm) dipping is not necessary |
|
being filled with rosin. |
|
|
|
Spare parts: |
|
|
|
Soldering loops can be purchased in stores with electrical installation materials. |
|
|
|
Warning: |
|
|
|
Use the soldering gun only at the voltage mentioned on the label and in the instructions;Before the first start-up |
|
check the condition of the power cable |
|
so that it is not damaged;This check must be repeated before every other use |
|
or in case of suspicion of damage due to incorrect handling;Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron;For all actions - replacing the handle |
|
checking the power cable |
|
etc;the soldering gun must be without voltage |
|
the plug removed from the socket. |
|
|
|
Liquidation: |
|
|
|
Liquidate the product according to the valid regulations and orders |
|
i.e;hand over the packaging and electrical devices to the places designated for this purpose;All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications |
|
or by the manufacturer;This appliance can be used by children aged 8 years and older and the elderly or with reduced physical |
|
mental and sensory capabilities or with insufficient experience and knowledge |
|
only if they are supervised or have been instructed in the safe use of the appliance;the consumer and understand possible dangers;It is forbidden for children to play with this consumer;Cleaning and maintenance by the user cannot be performed by children without supervision. |
Excelent
