|
Charger Li-Ion/Ni-MH/Ni-Cd/LiFePO4 |
|
|
|
Power Input: |
|
- PD2.0(12V 1.67A) Recommend |
|
- QC3.0(9V 2A)/5V 2A |
|
|
|
3.6V/3.7V Li-Ion: |
|
|
|
10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650/18700/20700/21700/22650/25500/26650/32650 |
|
Constant Charging Current: 3Ax1 / 2Ax2 / 1Ax4 / 0.5Ax4 / 0.25Ax4 |
|
Charging Cutoff Voltage:4.20±0.05V |
|
Charging Cutoff Current: ≤150mA |
|
|
|
1.5V Li-ion AAA/AA |
|
|
|
Constant Charging Current: 0.5Ax4 |
|
Charging Cutoff Voltage: N/A |
|
Charging Cutoff Current: ≤150mA |
|
|
|
1.2V Ni-MH AAA/AA/A/SC/C/D |
|
|
|
Constant Charging Current: 0.5Ax4 |
|
Charging Cutoff Voltage: 1.45±0.1V |
|
Charging Cutoff Current: ≤150mA |
|
|
|
3.2V LiFePO4: |
|
|
|
10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650 /18700/20700/21700/22650/25500/26650/32650 |
|
Constant Charging Current: 3Ax1 / 2Ax2 / 1Ax4 / 0.5Ax4 / 0.25Ax4 |
|
Charging Cutoff Voltage: 3.65±0.05V |
|
Charging Cutoff Current: ≤150mA |
|
|
|
Safety Features: |
|
Intelligent detection |
|
Reverse polarity protection |
|
Over-Current protection |
|
Over-Voltage protection |
|
Over-Charge protection |
|
Short-Circuit protection |
|
Auto-Stop after full charge |
|
Soft start |
|
|
|
Product Advantage |
|
|
|
• The first capacity tester for rechargeable 1.5V Li-ion batteries. |
|
• Compatible with 3.6/3.7V Li-ion |
|
1.5V Li-ion |
|
1.2V Ni-MH and 3.2V LiFePO4 batteries. |
|
• High precision capacity test to distinguish overrated batteries. |
|
• Smart battery recognition prevents mis-charging. |
|
• Intelligent optimal charging strategy matching. |
|
• Manual current selection function to meet different needs. |
|
• Higher recovery success rate for over-discharged batteries. |
|
• LCD screen displays real-time charging status. |
|
• Built-in multiple protections for charging safety. |
|
|
|
Tips: |
|
|
|
1) Please use only compatible batteries to avoid damaging both the battery and the charger. |
|
2) For the best charging experience |
|
it is recommended to use an adaptor with the 12V 1.67A PD protocol;If the |
|
input power is insufficient |
|
the charger will adjust charging current correspondingly. |
|
3) Please choose the correct charging mode based on the battery type. |
|
4) When the LCD screen displays "Err" |
|
please promptly remove the battery. |
|
5) It is recommended to remove the battery after it is fully charged. |
|
|
|
Packaging: box 1 pc. |
Excelent
